Degree of Financial Leverage (DFL): Definition and Formula (2024)

What Is a Degree of Financial Leverage - DFL?

A degree of financial leverage (DFL) is a leverage ratio that measures the sensitivity of a company’s earnings per share (EPS) to fluctuations in its operating income, as a result of changes in its capital structure. The degree of financial leverage (DFL) measures the percentage change in EPS for a unit change in operating income, also known as earnings before interest and taxes (EBIT).

This ratio indicates that the higher the degree of financial leverage, the more volatile earnings will be. Since interest is usually a fixed expense, leverage magnifies returns and EPS. This is good when operating income is rising, but it can be a problem when operating income is under pressure.

The Formula for DFL Is

DFL=%changeinEPS%changeinEBIT\text{DFL}=\frac{\%\text{change in EPS}}{\%\text{change in EBIT}}DFL=%changeinEBIT%changeinEPS

DFL can also be represented by the equation below:

DFL=EBITEBITInterest\text{DFL}=\frac{\text{EBIT}}{\text{EBIT }-\text{ Interest}}DFL=EBITInterestEBIT

What Does Degree of Financial Leverage Tell You?

The higher the DFL, the more volatile earnings per share (EPS) will be. Since interest is a fixed expense, leverage magnifies returns and EPS, which is good when operating income is rising but can be a problem during tough economic times when operating income is under pressure.

DFL is invaluable in helping a company assess the amount of debt or financial leverage it should opt for in its capital structure. If operating income is relatively stable, then earnings and EPS would be stable as well, and the company can afford to take on a significant amount of debt. However, if the company operates in a sector where operating income is quite volatile, it may be prudent to limit debt to easily manageable levels.

The use of financial leverage varies greatly by industry and by the business sector. There are many industry sectors in which companies operate with a highdegree of financial leverage. Retail stores, airlines, grocery stores, utility companies, and banking institutions are classic examples. Unfortunately, the excessive use of financial leverage by many companies in these sectors has played a paramount role in forcing a lot of them to file forChapter 11bankruptcy.

Examples include R.H. Macy (1992), Trans World Airlines (2001), Great Atlantic & Pacific Tea Co (A&P) (2010) and Midwest Generation (2012). Moreover, excessive use of financial leverage was the primary culprit that led to the U.S.financial crisisbetween 2007 and 2009. Thedemise of Lehman Brothers(2008) and a host of other highly leveredfinancial institutionsare prime examples of the negative ramifications that are associated with the use of highly levered capital structures.

Key Takeaways

  • The degree of financial leverage (DFL) is a leverage ratio that measures the sensitivity of a company’s earnings per share to fluctuations in its operating income, as a result of changes in its capital structure.
  • This ratio indicates that the higher the degree of financial leverage, the more volatile earnings will be.
  • The use of financial leverage varies greatly by industry and by the business sector.

Example of How to Use DFL

Consider the following example to illustrate the concept. Assume hypothetical company BigBox Inc. has operating income or earnings before interest and taxes (EBIT) of $100 million in Year 1, with interest expense of $10 million, and has 100 million shares outstanding. (For the sake of clarity, let’s ignore the effect of taxes for the moment.)

EPS for BigBox in Year 1 would thus be:

OperatingIncomeof$100Million$10MillionInterestExpense100MillionSharesOutstanding=$0.90\frac{\text{Operating Income of \$100 Million }-\text{ \$10 Million Interest Expense}}{\text{100 Million Shares Outstanding}}=\$0.90100MillionSharesOutstandingOperatingIncomeof$100Million$10MillionInterestExpense=$0.90

The degree of financial leverage (DFL) is:

$100Million$100Million$10Million=1.11\frac{\text{\$100 Million}}{\text{\$100 Million }-\text{ \$10 Million}}=1.11$100Million$10Million$100Million=1.11

This means that for every 1% change in EBIT or operating income, EPS would change by 1.11%.

Now assume that BigBox has a 20% increase in operating income in Year 2. Notably, interest expenses remain unchanged at $10 million in Year 2 as well. EPS for BigBox in Year 2 would thus be:

OperatingIncomeof$120Million$10MillionInterestExpense100MillionSharesOutstanding=$1.10\frac{\text{Operating Income of \$120 Million }-\text{ \$10 Million Interest Expense}}{\text{100 Million Shares Outstanding}}=\$1.10100MillionSharesOutstandingOperatingIncomeof$120Million$10MillionInterestExpense=$1.10

In this instance, EPS has increased from 90 cents in Year 1 to $1.10 in Year 2, which represents a change of 22.2%.

This could also be obtained from the DFL number = 1.11 x 20% (EBIT change) = 22.2%.

If EBIT had decreased instead to $70 million in Year 2, what would have been the impact on EPS? EPS would have declined by 33.3% (i.e., DFL of 1.11 x -30% change in EBIT). This can be easily verified since EPS, in this case, would have been 60 cents, which represents a 33.3% decline.

Degree of Financial Leverage (DFL): Definition and Formula (2024)

FAQs

Degree of Financial Leverage (DFL): Definition and Formula? ›

DFL determines the percentage change in a company's EPS per unit change in its EBIT. A company's DFL is calculated by dividing its percentage change in EPS by the percentage change in EBIT over a certain period.

How to calculate DFL financial leverage? ›

Degree of financial leverage formulas
  1. DFL = (% of change in net income) / (% of change in the EBIT) In this formula, the percent change in a company's earnings before interest and taxes (EBIT) divides into the percent change of the company's net income.
  2. DFL = (EBIT) / (EBT)
Dec 26, 2022

What is financial leverage and its formula? ›

The financial leverage formula is equal to the total of company debt divided by the total shareholders' equity. If the shareholder equity is greater than the company's debt, the likelihood of the company's secure financial footing is increased.

What is the degree of financial leverage defined as? ›

The degree of financial leverage (DFL) is a leverage ratio that measures the sensitivity of a company's earnings per share to fluctuations in its operating income, as a result of changes in its capital structure.

How do you calculate degree leverage? ›

If we divide the % change in net income by the % change in EBIT, we can calculate the degree of financial leverage (DFL). From our illustrative example, we can see when a company exhibits positive growth in EBIT, debt financing contributes towards greater net income growth (1.0x vs. 2.0x).

What is the degree of financial leverage if EBIT equals $200000 and interest equals $40000? ›

If EBIT equals $200,000 and interest equals $40,000, what is the degree of financial leverage? B. 1.25x . Here's the best way to solve it.

What is a good degree of financial leverage ratio? ›

A financial leverage ratio of less than 1 is usually considered good by industry standards. A leverage ratio higher than 1 can cause a company to be considered a risky investment by lenders and potential investors, while a financial leverage ratio higher than 2 is cause for concern.

How do I calculate my leverage? ›

One of the simplest leverage ratios a business can measure is its debt-to-asset ratio. This ratio shows how much a company uses debt to finance its assets. You can calculate this metric by dividing the total debt—both short-term and long-term, by total assets.

What is financial leverage for dummies? ›

Financial leverage is the strategic endeavor of borrowing money to invest in assets. The goal is to have the return on those assets exceed the cost of borrowing the funds. The goal of financial leverage is to increase profitability without using additional personal capital.

How to interpret DFL? ›

The degree of financial leverage can be interpreted as follows: - If DFL = 1, then the company has no debt and its EPS is not affected by its operating income. - If DFL > 1, then the company has debt and its EPS is more volatile than its operating income. A small change in EBIT can lead to a large change in EPS.

What is a high DFL? ›

A company's DFL represents the riskiness of its capital structure, which includes its debts and equity. When a company's fixed financial costs account for a large percentage of its earnings, its DFL will be high. The higher a company's DFL, the more risky its capital structure.

What is a good debt to equity ratio? ›

Generally, a good debt ratio is around 1 to 1.5. However, the ideal debt ratio will vary depending on the industry, as some industries use more debt financing than others. Capital-intensive industries like the financial and manufacturing industries often have higher ratios that can be greater than 2.

What is a good degree of operating leverage? ›

As per experts, 1.1% of operating leverage is considered good for a company. The percentage here means that for a 1% change in sales, the operating leverage changes by 1.1%. As this number is close to 1, it indicates a safer company.

What is the financial leverage formula? ›

Financial Leverage Formula = Total Debt / Shareholder's Equity.

What is an example of a financial leverage? ›

They borrow this money in anticipation that they would receive higher returns in the future. Margin is a type of financial leverage that helps to increase buying power. Example: If an investor needs ₹100,000 in collateral to purchase ₹10,00,000 worth of securities, they can get a 1:10 margin.

What is the formula for the degree of total leverage? ›

The degree of total leverage (DTL) is a measure of the sensitivity of net income to changes in unit sales, which is equivalent to DTL = DOL × DFL.

How do you calculate fund level leverage? ›

For instance, say a fund raises $100 million in equity capital and then obtains a $400 million loan. It takes the total of $500 million and buys investment securities with it. In this case, you can calculate the gross leverage as $500 million divided by $100 million, or 5.

How do you calculate financial leverage ratio? ›

The formula to calculate the financial leverage ratio divides a company's average total assets to its average shareholders' equity. Where: Average Total Assets = (Beginning + Ending Total Assets) ÷ 2. Average Shareholders' Equity = (Beginning + Ending Total Equity) ÷ 2.

What is the formula for the leverage effect? ›

Leverage effect is expressed in the following formula: ROE = ROCE + (ROCE – i) ? D/E, where ROE is the Return on Equity, ROCE is the after-tax Return on Capital employed, i is the after-tax Cost of debt, D- Net debt, E – Equity. The leverage effect itself is the (ROCE-i) x D/E.

Top Articles
Latest Posts
Article information

Author: Reed Wilderman

Last Updated:

Views: 5474

Rating: 4.1 / 5 (52 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Reed Wilderman

Birthday: 1992-06-14

Address: 998 Estell Village, Lake Oscarberg, SD 48713-6877

Phone: +21813267449721

Job: Technology Engineer

Hobby: Swimming, Do it yourself, Beekeeping, Lapidary, Cosplaying, Hiking, Graffiti

Introduction: My name is Reed Wilderman, I am a faithful, bright, lucky, adventurous, lively, rich, vast person who loves writing and wants to share my knowledge and understanding with you.